kryptik954 Posted February 17, 2004 Share Posted February 17, 2004 i kno this question has been asked before but no one ever responded to them. i was wondering how 2 adjust tha headlights on a 93 gs cuz my driver side headlight shines 2 tha ground 2 much. someone please holla back. thnx in advance!! :whistles: Quote Link to comment Share on other sites More sharing options...
TWINTURBO619 Posted February 17, 2004 Share Posted February 17, 2004 i kno this question has been asked before but no one ever responded to them. i was wondering how 2 adjust tha headlights on a 93 gs cuz my driver side headlight shines 2 tha ground 2 much. someone please holla back. thnx in advance!! :whistles: it should be the phillips screw that is visible at the top part of your headlights that should adjust your headlights. you should also have a liquid measure as well to match the other headlight. good luck Quote Link to comment Share on other sites More sharing options...
JPI Posted February 18, 2004 Share Posted February 18, 2004 Also you will need to have the buble in the center. JPI Quote Link to comment Share on other sites More sharing options...
kryptik954 Posted February 18, 2004 Author Share Posted February 18, 2004 which bubble? there are 2 liquid measures....so should both of them be in tha center>? thanx again Quote Link to comment Share on other sites More sharing options...
TWINTURBO619 Posted February 18, 2004 Share Posted February 18, 2004 which bubble? there are 2 liquid measures....so should both of them be in tha center>? thanx again when you start adjusting the headlights, you'll see the the bubble moving. just line up in the center of the liquid measures... inbetween the two lines so your lights will be even. Quote Link to comment Share on other sites More sharing options...
kryptik954 Posted February 22, 2004 Author Share Posted February 22, 2004 ive been trying 2 turn tha screws 2 adjust tha headlightz but nothing is moving...can someone please explain more on which screw 2 turn? or maybe a picture of which one? that will be great...thanx homies...glad everyone is so helpful! Quote Link to comment Share on other sites More sharing options...
BRAKATK Posted February 27, 2004 Share Posted February 27, 2004 THe screws are a couple inches long sticking out, and they have a nut shape head that you can put a small wrench on. That is how I've adjusted them. Just the lights on facing a garage door, and turn the lights until they are the level you want. Quote Link to comment Share on other sites More sharing options...
ltuned93 Posted February 28, 2004 Share Posted February 28, 2004 i believe the screw on the top adjusts up and down while the screw on the bottom is left to right. now don't quote me on this but i seem to remember it being that way. as far as the bubble is concerned don't but too much into centering the bubble. use a garage door or a wall while it's dark to adjust the level and to even the two lights out. because if you're like me and the front of you're car as ever had work done to it. the bubbles could be right on and the light is way off. they never seem to go back just the way they were after body work! hope this helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.