How Do I Replace The Rear Marker Light On My 2006 Rx 400H?

[Knerq]

I ordered the replacement part off of Amazon. How do I install it myself?

[cduluk]

I assume you are talking about the red side markers at the lower back (left and right) of the bumper? If so, you need to remove the bumper a few inches to gain access to the light units.

[maseace]

I was able to remove the fixture from behind the bumper without removing the bumper. It was a tight fit and I had to remove the plastic panel behind the wheel well, so maybe the bumper would have been an easier route. I ordered some bulb sockets so I can add LED bulbs to the center part of the bumper light housings, wired to the marker lights. They were designed to have bulbs in them, but in the US model bulbs are not included, and the housing does not have the hole cut for the bulb socket. I'll post some pics when I get the project done.

[Knerq]

Thanks - pictures would be helpful. Here's what it looks like now.

[RXREY]

Thanks - pictures would be helpful. Here's what it looks like now.

I don't understand, what happened?

[SW03ES]

I think he wants to replace the whole lamp housing not just the bulb.

You don't want to have that professionally repaired? Thats ugly as hell...