lemon Posted June 5, 2010 Posted June 5, 2010 Any do it yourselfers notice that the oil drain catch under the filter is totally useless, or is it my car in particular? When I unscrew the filter, the oil runs down behind the guide (between the block and the guide) rather than into the guide itself. I'm wondering whether it does this for everyone, or am I missing a gasket or something between the guide and the block.
RX400h Posted June 5, 2010 Posted June 5, 2010 No matter how meticulously I clean that oil, there is always a few drops on the garage floor, afterward. Once I clean that up, no additional oil will show up until the next oil change. Since I reach up from underneath, with the plastic cover pushed out enough for my hand to get an adjustable wrench on the oil filter's welded-on nut, I really can't see much. Therefore, I can't see everything you are showing in the photo.
Gryphon Posted June 5, 2010 Posted June 5, 2010 I agree, there are always some drips. I change my filter from the top side now and just put a rag underneath beforehand. Tom
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now