andre Posted October 4, 2009 Share Posted October 4, 2009 hello, have a problem changing a bulb in a driving light :(( i can not remove the assembly , after udoing 2 screws what should I do next ? I dont want to break anything... how many screws are holding the assembly ? URGENT ! ! ! Quote Link to comment Share on other sites More sharing options...
90LS400Lexus Posted October 4, 2009 Share Posted October 4, 2009 hello,have a problem changing a bulb in a driving light :(( i can not remove the assembly , after udoing 2 screws what should I do next ? I dont want to break anything... how many screws are holding the assembly ? URGENT ! ! ! If you have an owners manual handbook instructions are there. I have had to change both of mine.... its easy. There are actually three bolts and a nut that have to come out. You have to take out the side marker light as well to gain access to the ones on the outer side. One bolt is on the lowest part of the inside of the light... the other is above the fog light, the other is on the lower right side... then there is a nut above that has to come off. Quote Link to comment Share on other sites More sharing options...
RandySC400 Posted October 5, 2009 Share Posted October 5, 2009 lexls.com has a DYI on this... good pics to help you. its quite simple. Quote Link to comment Share on other sites More sharing options...
andre Posted October 5, 2009 Author Share Posted October 5, 2009 Thanks, done it :) Regards Quote Link to comment Share on other sites More sharing options...
jcrome04 Posted October 6, 2009 Share Posted October 6, 2009 4 10mm bolts/nuts per lamp. Parking lamp must be removed to get to the 2 on the outter side. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.