s.on.gGS300 Posted May 15, 2008 Posted May 15, 2008 Im getting condensation in one of my headlights so I decided to open em up, clean em, and remove the orange reflector. Only problem is, Im not 100% about where the line I seperate them is at. I've already ran a search using "headlamp" "headlight" "remove headlight" "headlight removal" "lens" and didnt find exactly what I was looking for. Can anyone tell me, or better yet, show me a picture of where I seperate the lens from the housing? Much appreciated. ~matt
sakataj Posted May 15, 2008 Posted May 15, 2008 its where the clear "glass" or clear plastic meets the black plastic! easiest way to seperate them is to remove all the bulbs/wiring and put them in the oven AT A LOW TEMP ON A TRAY so the adheshive warms up and you shoudl be able to easily pry them apart with a flat object (i used a interior panel puller when i did my es300 headlights i got from my buddies at a audio shop) but you could use a flathead JUST be very careful you not trying to gouge it! if it doesnt seperate easily put it back into the oven and let the glue melt a little bit more! hope that helps! brian post some pics when you done so we can see how it turned out!
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now