lonewatie Posted April 9, 2008 Posted April 9, 2008 How can I enable the function which will allow a passenger to use the nav system, i.e. input points, while the car is moving?
Step Hen Posted April 9, 2008 Posted April 9, 2008 Depends on what version navigation software you are running. 5.1? 6.1? 7.1? etc. Post and then we'll let you know if it's possible.
copperdog Posted April 16, 2008 Posted April 16, 2008 Depends on what version navigation software you are running.5.1? 6.1? 7.1? etc. Post and then we'll let you know if it's possible. I'd like to know too. I'm using 5.1. Can I also use voice to use Bluetooith phone?
Omegaman Posted April 30, 2008 Posted April 30, 2008 Depends on what version navigation software you are running.5.1? 6.1? 7.1? etc. Post and then we'll let you know if it's possible. I'd like to know too. I'm using 5.1. Can I also use voice to use Bluetooith phone? One of the following methods should work for you since you have version 5.1 -- (it depends on what vehicle and year you have, will not work for newer versions, 6.1 or later) Step 1 Press The Menu button Step 2 Press the Volume button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press and hold the Override Button until system beeps Step 8 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Step 1 Press The Menu button Step 2 Press the System button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press The Lower Right of the screen Step 8 Press and hold the Override Button until system beeps Step 9 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Step 1 Press The Menu button Step 2 Press the DVD button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press The Lower Right of the screen Step 8 Press and hold the Override Button until system beeps Step 9 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Omegaman
ErnieG Posted May 2, 2008 Posted May 2, 2008 I have a 2004 LS430 ( I beleive it is Gen 4 system) with map data 3.1. What is the latest data update I can use which will allow me to use the override steps mentioned below. Also any places to buy the disk? Any post you can refer me to for intallation instructions? Thx Ernie Depends on what version navigation software you are running.5.1? 6.1? 7.1? etc. Post and then we'll let you know if it's possible. I'd like to know too. I'm using 5.1. Can I also use voice to use Bluetooith phone? One of the following methods should work for you since you have version 5.1 -- (it depends on what vehicle and year you have, will not work for newer versions, 6.1 or later) Step 1 Press The Menu button Step 2 Press the Volume button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press and hold the Override Button until system beeps Step 8 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Step 1 Press The Menu button Step 2 Press the System button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press The Lower Right of the screen Step 8 Press and hold the Override Button until system beeps Step 9 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Step 1 Press The Menu button Step 2 Press the DVD button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press The Lower Right of the screen Step 8 Press and hold the Override Button until system beeps Step 9 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Omegaman
ErnieG Posted May 2, 2008 Posted May 2, 2008 Oops wrong section in the Forum I have a 2004 LS430 ( I beleive it is Gen 4 system) with map data 3.1.What is the latest data update I can use which will allow me to use the override steps mentioned below. Also any places to buy the disk? Any post you can refer me to for intallation instructions? Thx Ernie Depends on what version navigation software you are running.5.1? 6.1? 7.1? etc. Post and then we'll let you know if it's possible. I'd like to know too. I'm using 5.1. Can I also use voice to use Bluetooith phone? One of the following methods should work for you since you have version 5.1 -- (it depends on what vehicle and year you have, will not work for newer versions, 6.1 or later) Step 1 Press The Menu button Step 2 Press the Volume button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press and hold the Override Button until system beeps Step 8 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Step 1 Press The Menu button Step 2 Press the System button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press The Lower Right of the screen Step 8 Press and hold the Override Button until system beeps Step 9 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Step 1 Press The Menu button Step 2 Press the DVD button Step 3 Press The Upper Left of the screen Step 4 Press The Lower Left of the screen Step 5 Press Upper Left of the screen again Step 6 Press Lower Left of the screen again Step 7 Press The Lower Right of the screen Step 8 Press and hold the Override Button until system beeps Step 9 Press Back Button in upper right corner Done! The Buttons For Navigation & Phone are now accessible Omegaman
Gary A. Posted December 31, 2008 Posted December 31, 2008 I also want to program a destination or check POI while driving my new 2008 LS 460. Do you have a similar procedure for my car? Gary A.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now