J-Roc Posted September 2, 2006 Share Posted September 2, 2006 Hi all, I've got a no restart situation when my 91 LS400 warms up. No engine codes are present, but I'm still going to check the ohm values for the cam and crank sensors as stated in another thread. My question is would a slipping harmonic balancer cause a no restart situation?? Quote Link to comment Share on other sites More sharing options...
alsalih Posted September 2, 2006 Share Posted September 2, 2006 How many miles, and is it cranking and not starting or not cranking at all? Most likey cause of cranking and not starting after car is warm is due to the fuel pump going bad. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted September 2, 2006 Share Posted September 2, 2006 2 sentences is not a valuable explanation. Try and elaborate completely on the situation. Quote Link to comment Share on other sites More sharing options...
Threadcutter Posted September 2, 2006 Share Posted September 2, 2006 Hi all, I've got a no restart situation when my 91 LS400 warms up. No engine codes are present, but I'm still going to check the ohm values for the cam and crank sensors as stated in another thread. My question is would a slipping harmonic balancer cause a no restart situation?? J: Dead Starter?......................The current carrying contacts "burn up/out" over time. There can be a number of different possibilities. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.