Jump to content

Recommended Posts

Posted

Just wondering if anyone knows how long a inline 3.0 l6 will last from New w/dyno oil, To full throttle until the motor seizes. How long will the motor last ?


Posted

Just wondering if anyone knows how long a inline 3.0 l6 will last from New w/dyno oil, To full throttle until the motor seizes. How long will the motor last ?

Till it runs out of gas :P

Posted

Just wondering if anyone knows how long a inline 3.0 l6 will last from New w/dyno oil, To full throttle until the motor seizes. How long will the motor last ?

Till it runs out of gas :P

:lol::lol::lol:

Posted

Just wondering if anyone knows how long a inline 3.0 l6 will last from New w/dyno oil, To full throttle until the motor seizes. How long will the motor last ?

Till it runs out of gas :P

Yeah, I'll go along with that! lol :whistles: :lol:

:cheers:

Posted

Just wondering if anyone knows how long a inline 3.0 l6 will last from New w/dyno oil, To full throttle until the motor seizes. How long will the motor last ?

Till it runs out of gas :P

Yeah, I'll go along with that! lol :whistles: :lol:

:cheers:

Maybe JPI could shed some light on this. All jokes on the side.

Posted

In all honestly dc, I think that engine will last pretty much as long as any engine in the Lexus stable if it's taken care of. Just curious (as might others be) as to why your asking about the inline 6 specifically? :unsure:

:cheers:

Posted

In all honestly dc, I think that engine will last pretty much as long as any engine in the Lexus stable if it's taken care of. Just curious (as might others be) as to why your asking about the inline 6 specifically? :unsure:

:cheers:

Because of the balance, I know this test is done. And just can't find any info on it. The test is done on a engine stand at the factory. New motor, unlimited gasoline,dino oil, They start the engine and bring it to full throttle and run it until it seizes up. How long does it take ?

Posted

In all honestly dc, I think that engine will last pretty much as long as any engine in the Lexus stable if it's taken care of. Just curious (as might others be) as to why your asking about the inline 6 specifically? :unsure:

:cheers:

Because of the balance, I know this test is done. And just can't find any info on it. The test is done on a engine stand at the factory. New motor, unlimited gasoline,dino oil, They start the engine and bring it to full throttle and run it until it seizes up. How long does it take ?

Something to maybe ask Lexus head office directly, perhaps JPI (like you already have).....maybe the engine is still running as we speak! ;)

:cheers:

Posted

In all honestly dc, I think that engine will last pretty much as long as any engine in the Lexus stable if it's taken care of. Just curious (as might others be) as to why your asking about the inline 6 specifically? :unsure:

:cheers:

Because of the balance, I know this test is done. And just can't find any info on it. The test is done on a engine stand at the factory. New motor, unlimited gasoline,dino oil, They start the engine and bring it to full throttle and run it until it seizes up. How long does it take ?

Something to maybe ask Lexus head office directly, perhaps JPI (like you already have).....maybe the engine is still running as we speak! ;)

:cheers:

I would like to think so. I'll dig deeper ;)

Posted

Depends on how lean it's running.

If it's lean enough 2 push the EGT's over say 1400*F.... It'll burn a hole in a piston/ring eventually, but that won't stop the engine from running immediately either.

& Toyota's are tuned so un-godly rich. It'd run a long, long time.

Unless you were shoving an extra 1000bhp of FI into it. It wouldn't last 2 long on a test stand then!

Posted

Depends on how lean it's running.

If it's lean enough 2 push the EGT's over say 1400*F.... It'll burn a hole in a piston/ring eventually, but that won't stop the engine from running immediately either.

& Toyota's are tuned so un-godly rich. It'd run a long, long time.

Unless you were shoving an extra 1000bhp of FI into it. It wouldn't last 2 long on a test stand then!

Thanx Toys, I knew you would chime in on this. Do you know the name on such a test ? I beleive this is done in the R&D stages.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery