darkwingduck Posted January 23, 2006 Share Posted January 23, 2006 A few months ago I was having a problem with the O/D light flashing on and off. After getting the codes, Speed Sensor and Shift Solenoid, I repaced them. The car runs better but after I installed the new shift solenoids 1 and 2 the O/D started to flash again. I check the code and it keeps giving me the same codes 62 which is the no 1 shift solenoid, what gives? These parts are brand new. Help... Quote Link to comment Share on other sites More sharing options...
Toysrme Posted January 23, 2006 Share Posted January 23, 2006 Bad wiring, it's broken, or you didn't clip it in good enough. :) Quote Link to comment Share on other sites More sharing options...
wwest Posted January 23, 2006 Share Posted January 23, 2006 Your O/D lockup clutch has/is failing. Dual failures, simultaneously, shift solenoid and speed sensor, are highly unlikely. Speed sensor is used in all modes, gear ratios. Disconnect/reconnect the battery to reset memory, lock out the O/D and drive the car for awhile. If you get a "repeat" shift solenoid and/or speed sensor then continue looking there, otherwise...... Lockup clutches are not very sturdy, high miles in hilly/mountainous terrain, consistently heavy loading, towing, etc, lead to early failures. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.