lenore Posted October 2, 2005 Share Posted October 2, 2005 Just changed my rotors and pads on my RX300 (1999) with 118.8K miles. I purchased the Brembo disks and ceramic disk pads and cleaned all surfaces and lubed accordingly. I did note that the caliper locating pins (two) had a very slight wear pattern but were serviceable. I cleaned and lubed all four pins on both wheels and so far all brake shudder is gone. I torqued the wheels with a torque wrench and will give further feedback with this combination of Brembo and Ceramic pads. I am still waiting for the rear pads to show up. Quote Link to comment Share on other sites More sharing options...
TunedRX300 Posted October 2, 2005 Share Posted October 2, 2005 Good setup, I have Akebono and Brembo blank for the front, better stopping performance and produce far less dust than stock. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.