Repalce Front Motor Mount

[PES300]

OK I have replaced the dogbone and will attempt to replace also the front mount.

I searched a lot of forums and discovered that I shall need a 17 mm socket and need to jack up the oil pan.

Out of the three bolts one has to be removed from underneath and two from the top.

Do I need to put the car on a ramp , remove the bolt from underneath first , then put the car back on level, place a jack under the oil pan and remove the other two?.

(Oh I forgot that I should remove the center bolt as well)

Is there any tip in doing this? What is the torque specification?

Are the bolts hard to break loose?

appreciate any help

Thanks

[honkand]

What year of ES300? If it is 93 model then I can pass on the repair manual procedure.

DaveH

[PES300]

What year of ES300?  If it is 93 model then I can pass on the repair manual procedure.

DaveH

←

Yes it is a 93 es300 v6

appreciate repair manual procedure

I wish that you also have the procedure to remove the front exhaust pipe

Thnaks

[mdscorp]

What year of ES300? If it is 93 model then I can pass on the repair manual procedure.

DaveH

I am about to do this this weekend, could you please pass th erepair manual to me ? email is luis@mds-corp.com

thanks !!

[Toysrme]

Hey bud check the stickies. ;)