sjc6765 Posted August 11, 2005 Share Posted August 11, 2005 I have the TRAC idiot light coming on in my '93 sc300, on a previous string, I was told to clean the abs/traction control sensors in the wheel hubs. Has anybody done this, or know how to access them? Quote Link to comment Share on other sites More sharing options...
Paul_Cos Posted August 14, 2006 Share Posted August 14, 2006 Be Careful...they are easy to break when you remove them. I had my mechanic do it and we lost a sensor. Cost me about $200...still, it didn't fix the TRAC lite falure. WE ARE BAFFLED. So, I wouldn't recommend going that route. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted August 14, 2006 Share Posted August 14, 2006 Trac light failures that are related to the sensors have to do with a bearing failure but the sensor is fine. It is almost impossible to press the old ones out so when you get new bearings on a new hub it will have to get a new sensor as well. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.