99_rx300 Posted July 16, 2004 Posted July 16, 2004 where do i locate the mass air flow sensor?? and what does it look like??
customrx Posted July 18, 2004 Posted July 18, 2004 The mass-air-flow sensor is attached to the large intake hose on the back side of the air filter box and has a electrical plug going into it with I think 4 maby 5 wires..
bluestu Posted July 18, 2004 Posted July 18, 2004 I purchased one today and was wondering how difficult it is to install and if there is anything to be cautious of when installing?
SKperformance Posted July 19, 2004 Posted July 19, 2004 whyd did you get one it is as easy as changing an air filter with a flat head screwdriver
bluestu Posted July 21, 2004 Posted July 21, 2004 I had the codes checked and the mechanic told me that it was the mass air flow sensor. He said it was real dirty, cleaned it and told me if the check engine light came back on that I would need to replace it. It came back on almost immediately so I purchased a MAF off of eBay for $20. I put it on myself. It took a total of 60 seconds. That has got to be the easiest part to replace that I have come across. I cleared the codes by unhooking the battery terminals and my RX300 runs much better now. I would like to thank everyone who gave expert advice on fixing this problem
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now