chubyball
-
Posts
162 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Store
Articles
Videos
News & Articles
Posts posted by chubyball
-
-
parts.com
I don't see they have any. Any links please.
-
Where can I purchase new weather strip for my front & back doors. Dealer's parts are too expensive. Anyone knows?
-
Guys and gals, I am at my wits end with my Lex. I have a '91 LS 400. I am getting a severe misfire. I am idling at 500rpm and when I throttle the car up, it seems to stumble then also. I am smelling raw gas out the exhaust and it takes putting the accelerator to the floor to climb the slight incline into my driveway. I just changed the wires and put all new Denso Iridium plugs in. NO change, still running terrible. Any suggestions before I have this thing towed to the dealer. note: I have new rotors and distributor caps, but have not installed those as of yet.
Blake,
Did you replace the distributor by yourself?
-
I just fixed my trunk leaks in the weekend. I removed the weather strip from the trunk, also cleaned up the moist and dirt build up on the edge of the rubber. Since, the weather strip is still in good condition, I use silicon to reseal the it back on the trunk then keep the trunk close tight for a day.
Now, it looks good as new.
-
My trunk is leaking, I see the water runs down from the back wall where the trunk's lock located. Anyone have the same problem? and know how to resolve this? Replacement for weather strip from Dealer is $154.00
Thanks in advance.
-
Anyone know if I can replace 98 LEXUS STEREO with my current one model LEXUS LS 400 1995, with current model does not label as Nakamichi, I assume that its Pioneer model.
-
Scott,
when you said the wire on the back of the unit that is connect to the light switch, what color of the wire exactly? There are 3 connector Blue (small) White and Gray. I assume the wires must be locate in one of this connector. Does in the back of the circuit board label any name for this wire?
My backlight only lit up when I press on the back or the side of the radio case then it will cause them to light up fine at night time with head light is on. I suspect there were some loose solder or components, but there were none.
Does anyone here has Pioneer service manual?
Jeremy
Bob, (ls400)When you turn your lights on and your panel lights DIM, that is by design. There is a wire on the back of your unit that is connected to your light switch. When your lights go on it dims the panel lights because it assumes it is night time and you don't need as much light. You can override this by disconnecting that wire.
-
Hello guys,
Today I made some progress with fixing my stereo backlight and LCD display. First you guys can order your parts from https://www.pioneerelectronics.com. I would order the awhole LCD INDICATOR ASSY instead of just the LCD itself.
Regarding to the backlight problem, you need to have a pioneer service manual, they will provide the location and part of power supply where it fails your back light.
Here some examples below where I oder the parts and costs. This will save you about $100.00 from shipping to radio repair man.
Good luck to all.
http://parts.pioneerelectronics.com/model....lNum=KEXP8156ZT
Model No:KEXP8156ZT
CRT1615
S/M KEX-P8256ZT
NO
$40.82
CWM3714
LCD INDICATOR ASSY
YES
$123.95
-
Initially I thought my Fan Bracket bearing was making noise. So I did some reading here and try to remove it, but while removing it, I also found out the Tensioner bearing was bad then replaced them. After replaced them, noise still there then I replaced the belt idler bearing and the serpentine belt. Now, my car is running smooth at start up. The idle always set 1100rpm rather than 1500-1700rpm.
So, for those of you have problem with high idle problem. This could be solved if you replaced these items. Happy ending.
-
HI!If u could help me with my problem !I had to take apart the passenger seat track because rust caused by A/C dripping into the car ,I have stripped the plastic adjuster wheel inside the little piece which connect to the motor.Can u get the little plastic assembly what connect to the motor or i have to buy a whole track or ho w can i get it fixed.Thanks!I need a set of floor mat in tan color or ivory color for 99 gs300,price please!
The mats (#PT208-30980-08) are $110.40. It looks like Those parts are not sold seperatly. Here is a picture of how Lexus sells it. You may have to try used.
Thanks for the fast reply!!where can i get used parts like this ,do u guys have any phone number i can deal with?Oh yeah my radio display is bad too,any reasonable solution on that one ?Thanks again.
Please give me a quote on these folowing Items and also shipping charge.
I need a tensioner assembly
serpentine belt
Cabin filter (charcoal) type.
Stereo LCD
Car model LS400 1995 ZIPCODE 44907
-
I want to purchase some parts online for my Lexus, but don't know which website that sell OEM parts that can be trust worthy. Anyone here had a good and bad experience of purchasing online, please list them. Thanks
-
Tensioner bolt is left handed threads - clockwise to loosen - that easy - on replacement counter clockwise to tighten - torque to 27 ft-lbs....that simple.....
I just removed the whole tensioner assembly, I wonder if I can just replace the bearing only instead of the entire tensioner assembly. Where can I purchase it? So far, I got a quote from Imported Replacement Part for $129.99 and it comes as exact the picture show here.
-
Looks to me that the new tensioner is not compatible so you'll need a Lexus one. I always use OEM if I can afford it.
I am having the same problem right now, and I am about to replace the entire tensioner from Imported Replacement Parts which only cost me $129.99.
-
I removed the belt and found out the Tensioner belt bearing is bad, but not the fan bracket. Anyone have instruction how to remove the Tensioner? Please post a picture if you can. Thanks
-
I replaced my bulbs from RadioShack. it have been 3 years and they are still fine.
-
save yourself another $ 100 & buy off e-bay from lex-toy-parts.....do a search on "Lexus LS400 fan bracket" ...he is lextreme that you so often hear about.......
his fan brackets are original leftovers from some importer.....this is the original factory fan brackets that were installed OEM...
I just bought one.....his brackets contain the Japan "Koyo RR6 bearing" in them.....
They are not Chinese knock-offs that others are selling on e-bay.....
Jeff
Do i have to loose the Tensioner and remove the belt before remove the fan bracket?
Thanks
-
I have checked with IMPORT REPLACING PARTS they sell Genuine and it costs 199.00 includes with tax and shipping. What do you guys think?
-
Just received Internet fan bracket off Internet from lex-toy-parts....
Just like he said.....his brackets are overstock items from an importer......
these are Original Lexus Factory OEM fan brackets for only #$99....
I can tell by the bearing that is in these Brackets.......The orignal bearing was a "Koyo RR6" bearing & has brackets contain these.....
Put new bracket on today & car is running tops again......
Anyone how to remove the fan? Any special tools needed from dealer before tackle the job?
-
Anyone?
-
Can someone tell me the wiring color of the subwoofer means? I have solid GREEN and green with a BLACK tripe, which one is suppose to connect to red and black connector of the speaker
-
I am looking for a good body shop repair in Columbus Ohio. Anyone knows a good one?
-
Anyone here has problem with the rear subwoofer that does not play the bass sound? My subwoofer lost the bass I wonder what's wrong with it? But there is still sound come out from it.
-
Anyone knows why Idling is high at warmup? After 3-5 mins warm up the idle goes back to normal 400-500rpm. The colder it gets the high the idle will be at startup. At normal 50-60 degree F, the idle will start out at 1500rpm. It gests worst when 10 degrees outside, it will start at 1900 rpm. Thanks for any inputs.
-
Anyone?
Electric Power Loss
in 92 - 00 Lexus SC300 / SC400
Posted
Few months ago, it was very cold here in Ohio below 0 degree. My battery 1 year old was also killed, thanks for AUTOZONE replaced brand new one without charge. I thought my Alternator was gone, but it was not after I removed the battery and brought to AUTOZONE for checkup. They told me it was shot, everytime, he added the load to it. Otherwise, it seems good condition, +12v without load.