John Hanlin Posted March 23, 2021 Posted March 23, 2021 Filler lid opens fine from inside, but won't close without pulling the emergency strap inside the hatch. Any suggestions? John
RX400h Posted March 24, 2021 Posted March 24, 2021 I know this is a different model but perhaps the solution with work with your vehicle with the correct part number.
John Hanlin Posted March 24, 2021 Author Posted March 24, 2021 Thanks for the reply. I had this problem with my 2004 RX, but the opening spring is fine on my 2007 RX. It is the latching pin staying out and interfering with the closing latch.. Each time I get gas I have to open the hatch and pull the "emergency" opening strap while I push the filler door closed. Good thing the filler door and inside release are on the same side so that I can reach them at the same time. Annoying but fixable if I take the inside panel off. Didn't know if there was an easier solution.
RX400h Posted March 25, 2021 Posted March 25, 2021 The only other thing I could find was someone who had to replace the fuel door actuator motor because it wouldn't pull the pin back all the way.
John Hanlin Posted March 25, 2021 Author Posted March 25, 2021 I have just the opposite problem. Thanks for checking.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now