lexbubba99gs300 Posted May 10, 2004 Share Posted May 10, 2004 Can anyone help me with some information on how to get my factory rotors off so I can replace them with the Brembo drilled and slotted rotors ? I have tried twice now and am not sure why they are not coming off. thanks for any help. Quote Link to comment Share on other sites More sharing options...
lexbubba99gs300 Posted May 13, 2004 Author Share Posted May 13, 2004 I got them off yesterday , it just took the right blow from the sledge .. just thoguht I would inform anyone who mihgt read this post .. Quote Link to comment Share on other sites More sharing options...
Neo Posted May 13, 2004 Share Posted May 13, 2004 There are also bolt holes on the stock rotor hub. I can't remember what size these are but if you put the bolts in, as you tighten, it will put pressure on the hub (since the bolt is geting longer on the other side) and pop out the rotor. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted May 14, 2004 Share Posted May 14, 2004 yup the 2 bolts from the rear caliper sliders fit right in there to remove them. Quote Link to comment Share on other sites More sharing options...
steviej Posted May 14, 2004 Share Posted May 14, 2004 it just took the right blow from the sledge 8lb sledge: aka. FORD WRENCH :D Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.