jetcobra Posted September 20, 2019 Share Posted September 20, 2019 Was having no problems with the camera and then all of a sudden all I get is a white screen, so I checked the voltage at the camera cable connector in the rear hatch and got 6.28 VDC so it looks like it is not a fuse issue so probably the camera itself. Before I go further wanted to ask if anyone else has had this happen and how you handled it? Thanks Quote Link to comment Share on other sites More sharing options...
RX400h Posted September 26, 2019 Share Posted September 26, 2019 Are you certain that the voltage is supposed to be about 6? Quote Link to comment Share on other sites More sharing options...
jetcobra Posted September 27, 2019 Author Share Posted September 27, 2019 That is what I measured at the camera connector. I have since ordered and received a new camera from Amazon and installed it and it works perfectly, so it would seem that the camera is a 5 VDC camera. Quote Link to comment Share on other sites More sharing options...
RX400h Posted September 29, 2019 Share Posted September 29, 2019 Thanks for the update. Ours is still working well but I'll keep an eye on that camera. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.