Jump to content


Recommended Posts

Posted

Hello- I am unable to control the passenger windows and locks anymore.

Can someone assist me with this issue?

Regards,

L

Posted

The windows have to be initialized if the battery is disconnected or if the window controls are disconnected. Go to each window control at each door and run it all the way down then up. The driver door controls should then work normally.

Posted

The windows have to be initialized if the battery is disconnected or if the window controls are disconnected. Go to each window control at each door and run it all the way down then up. The driver door controls should then work normally.

Based on his post about the locks also not working I am not sure that this will work. It's been a long time since I have had to do it but if I remember correctly the locks ail continue to work. But this was the first thing I thought as well.

Get this I know someone who has a rx330 and they had the battery changed and all of the windows stopped working so they took the car back to jiffy lube where the battery was changed. Jiffy Lube sent the car to the Gemini Service center who diagnosed all the window modulators bad. They said they were going to charge like $1400. Anyway I knew this person and when they told me about it I told them the little trick above and they all worked fine. Give it a shot but like I said to my knowledge your locks should still work but I may be wrong. :cheers::cheers:

Posted

No joy with the listed suggestion. Any other options?

Thanks for replying

L

Posted

Can these functions be controlled if you use the switches on each door's own panel? Can the drivers window and lock be controlled via the panel on the drivers door?

What about the lock switch on the front passenger door, does that work?

Posted

Can these functions be controlled if you use the switches on each door's own panel? Can the drivers window and lock be controlled via the panel on the drivers door?

What about the lock switch on the front passenger door, does that work?

Yes, the switches function on each door's panel. And, the front passenger door lock switch also functions.

But, no, the drivers lock switch does not function -cannot lock any doors.

L

Posted

Probably a loose connection within the drivers control panel. Any chance your RX is still under warranty?

Posted

Probably a loose connection within the drivers control panel. Any chance your RX is still under warranty?

Actually, yes. I purchased it used with a warranty.

I am assuming it needs to be taken in based on your response.

L

Posted

Yeah, i would definitely have Lexus take a look... If it's something simple they probably won't charge you, and if it's something more complicated they'll replace the broken part free of charge. <_<

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery