fergi Posted December 3, 2010 Posted December 3, 2010 has anyone changed the cv joints on their lexus es300, how difficult is it and how long does it take. cheers fergi
fergi Posted February 13, 2011 Author Posted February 13, 2011 has anyone changed the cv joints on their lexus es300, how difficult is it and how long does it take. cheers fergi no answers i find that a bit unusual, anyway i have fixed the problem. cheers fergi
fergi Posted February 13, 2011 Author Posted February 13, 2011 has anyone changed the cv joints on their lexus es300, how difficult is it and how long does it take. cheers fergi no answers i find that a bit unusual, anyway i have fixed the problem. cheers fergi
Soar Posted February 18, 2011 Posted February 18, 2011 I joined the club today and saw this note. How long did it take you for fixing it? I have done it a few times. It took me a couple hours each time. Every time I sent my car in for "service" I got broken CV boots back even they were newly replaced ones (go figure). I decided to replace the axles myself.
lenore Posted February 19, 2011 Posted February 19, 2011 I have done it on The RX300, should be the same. The worst part is pulling the hub assembly away from the axle. Unbolting the lower two shock bolts allows you to move hub away from axle. Be very careful when pulling axle from transmission or you could destroy the tranny seal....Also make sure it is seated (the new axle) into the Transmission. There is a spring clip on the axle which locks the axle carrier into the tranny.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now