gladelman Posted February 3, 2004 Share Posted February 3, 2004 This posting was made almost 2 months ago and no one has provided any information. Surely, someone knows what to do. Anyone? :o The tail light/brake light bulb on my 2000 LX470 is burned out and I cannot figure out how to remove the lens or assembly to replace it. It is the outboard lens attached to the body, not the one attached to the tail gate. Should be simple but it is a mystery to me. If it is a clip fitting, is a special tool needed to avoid breaking the clip or disfiguring the plastic or paint? Thanks. Quote Link to comment Share on other sites More sharing options...
mannlein Posted May 27, 2004 Share Posted May 27, 2004 I have the same vehicle with the same problem. Did you ever figure this out? Any help on removing the lens is greatly appreciated. Thanks. Quote Link to comment Share on other sites More sharing options...
gladelman Posted May 28, 2004 Author Share Posted May 28, 2004 The solution is very simple. Remove two tork screws that are revealed when the tailgate is let down and gently pull or pry the lens TO THE SIDE, not straight back. The tailight assembly is removed and bulb connections are revealed. Quote Link to comment Share on other sites More sharing options...
mannlein Posted June 1, 2004 Share Posted June 1, 2004 I will give it a try tonight. Thanks for the guidance. Quote Link to comment Share on other sites More sharing options...
markdief Posted November 19, 2004 Share Posted November 19, 2004 Thanks for taking the time to answer this for the other fellow. I just had the same problem tonight and this made the problem simple to solve as it should be. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.