lex2 Posted February 2, 2010 Share Posted February 2, 2010 Folks, I have some minor rust spots on both rear Qpanels on my 99 RX300. I want to HALT the rust from advancing. I know the drill, once rust starts...yada yada...but there are some smart people out there who have hopefully come about a solution for this. What say you!??? :) Thanks for any input! JBL :( Quote Link to comment Share on other sites More sharing options...
rswansbro Posted February 5, 2010 Share Posted February 5, 2010 Folks,I have some minor rust spots on both rear Qpanels on my 99 RX300. I want to HALT the rust from advancing. I know the drill, once rust starts...yada yada...but there are some smart people out there who have hopefully come about a solution for this. What say you!??? :) Thanks for any input! JBL :( I too have rust starting on the rear Q-Panels between the lower fascia and the Q-Panel. The paint is bubbling which indicates rust under the surface. Help! Thanks in advance for any and all suggestions! Quote Link to comment Share on other sites More sharing options...
cduluk Posted February 5, 2010 Share Posted February 5, 2010 Take it to a good autobody shop. They'll need to sand down all the rust to bare metal, and re-paint. Just do it before the rust eats through the sheet metal, as it's very thin <_< Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.