odiedavis Posted January 18, 2004 Posted January 18, 2004 Have a bad seat heater switch on the driver side. Should be easy to replace myself. Anyone done it before. Any tips? Thanks.
SKperformance Posted January 19, 2004 Posted January 19, 2004 i'll move this to the es 300 section as the workshop tutroials are for ones already done to be veiwed how do you know the seat heater switch is faulty it is about as simple to remove the switch as putting 2 fingers under the hand brake rubber cover and pushing up on the back of the switches and they pop forward
odiedavis Posted January 19, 2004 Author Posted January 19, 2004 Thanks! I know it's the switch because the light (for either high or low) on the switch flickers on and off as I jiggle the switch. Also, seat heats when the light on the switch is on and doesn't when it is off. From your tip, even though I don't have a hand brake, I just pulled the switches and swapped the switch from driver's side to passenger side. Problem moves with the switch. So, I'll replace the switch and problem solved. Thanks for your help.
xsohaib Posted January 19, 2004 Posted January 19, 2004 A used one would set you back about $40, go to the dealer and they will charge you $76 for it, however on the following website you can get it for $56 brandnew. http://www.trademotion.com/partlocator/ind...992&catalogid=1 Hope this helps Sohaib
SKperformance Posted January 20, 2004 Posted January 20, 2004 well you didn;t mention what year you have but i am guessing now that you have a 97 and up model
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now