In Need Of A Replacement Keyless Remote

[nll714]

I have 95 LS400 and do not have the keyless remote for it.....would like to get a replacement. Any suggestions, outside of the dealer, as to where I can get one at a reasonable price would be appreciated. In addition, is it a pain in the !Removed! to program one by yourself? Thanks

[jcrome04]

Always Sewell for keys.

http://www.sewellpartsonline.com/default.asp

I think there are some discount codes at CL for them.

[billydpowell]

Hi, you can buy one on ebay..

easy to program... I'm 75 and done mine lastyear,

do this:

1. sitting in driver seat, with driver's door OPEN, press lock/unlock button ON THE DRIVERS DOOR to lock all doors, then manually unlock driver door only.

2. Insert YOUR key in ignition, DO NOT TURN, then remove key.

3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles

4. Shut door.

5. Open door.

6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles

7. With the door open insert your key into the ignition, turn to 'on' position (DON'T START), wait 5 seconds. Turn off and remove key.

8. Locks should cycle once (Car will lock and then unlock once by herself). If they don't cycle or they cycle more than once, do steps 1-7 over.

9. Now using the remote, push lock button, hold for one second, then release the button. The locks should cycle once. If not, start over and go slower.

10. Close the door.

11. Open the door.

12. Press the lock button on the remote. The locks should do a lock-unlock cycle.

13. Close the door

14. Press the lock button on the remote, the doors should lock.

15. Press unlock button and the doors should unlock.

piece of cake....

[billydpowell]

sorry, duplicate