Jump to content


91 Ls 400 Ignition Sticks- Starter Stays On


bellingham

Recommended Posts

recently my ls400 ignition would stick in the start position and needed a nudge to return to on. now, the starter will stay on even if the key is turned to off. only when the key is removed will it stop.

Is this the ignition switch or other? Any PDFs on how to pull the switch?

Link to comment
Share on other sites


The symptoms do seem to indicate that your ignition switch is end of life.

You might try spraying some cleaning agent(not WD40) into the lock cylinder and then blowing the

cylinder out with compressed air. Sometimes lint and dirt gets into the lock and strange things begin to happen.

Link to comment
Share on other sites

sounds more like a dying starter. the solenoid contacts are probably fusing together from excess resistance. you need to get a rebuild or buy a new starter. i had this happen once on my previa van. the starter kept going even when the key was out of the ignition. i had to pull the battery.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership