antwon_a2d Posted December 3, 2006 Share Posted December 3, 2006 I have a 1993 ES300 with 166K Miles on it. I recently had the timing belt/water pump, front oil seals, valve cover gaskets replaced, and upgraded AC with a Compressor exchange. The tranny was replaced at 145K. I just got the car back a few days ago after it was sitting for nearly 6 months awaiting the oil seal repairs and AC repairs ($1500 total). Now when I start the car in the morning (in Atlanta Georgia), and attempt to drive within the first couple of minutes, it seems as if I am running a 2 cylinder versus a 6. What can be the problem? Any suggestions? Oh yes, If I allow the engine to warm for at least 10 minutes pryor to driving, it hesitates just a little into the first set of gear changes then it is off to the rases. Please give me your suggestions. Quote Link to comment Share on other sites More sharing options...
SKperformance Posted December 5, 2006 Share Posted December 5, 2006 You may have a stuck open EGR. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.