dghia Posted October 17, 2002 Share Posted October 17, 2002 :( How do you replace a bulb (stop light, tail lights) located in the tail light of a 92' SC300. Can some one please send me a step by step instructions. I appreciate any help. thanks! Quote Link to comment Share on other sites More sharing options...
AWJ Posted October 18, 2002 Share Posted October 18, 2002 Manuals were sold....... ...as far as finding some....... see below. At this point I do not have any instruction. There is a link in the faq to lex400sc's site. It may be of assistance. Also see below....... Quote Link to comment Share on other sites More sharing options...
UCF3 Posted February 10, 2003 Share Posted February 10, 2003 AWJ: What site did you get your repair manuels from, or did you get them through Toyota itself? On another note, do i know whether there is another way to replace the Fog Light bulbs on the SC300, other than taking the skid pad off? Quote Link to comment Share on other sites More sharing options...
AWJ Posted February 10, 2003 Share Posted February 10, 2003 UCF3: there are a few options for manuals. I saw this most recently... considered buying them. If anyone does, please post up on the quality of these items. My manuals came with the car when I bought it. I sold them after the wreck because I thought it would be while before I had a need for them. Go figure. http://planetsoarer.com/jeffharper/productguide.html Also the dealerships can sell factory manuals. I like Steve Ganz and his people. They do well at keeping people satisfied. I think I will contact him and see if he is interested in representing over here. Then there is always e-bay - I've heard those CD manuals there are not so hot, but never saw them first hand. You never know - you may be able to come along a factory manual on there or at a book store. Good luck. Quote Link to comment Share on other sites More sharing options...
UCF3 Posted February 13, 2003 Share Posted February 13, 2003 I might give Steve a call. Do you know how much he charges for the Manual? Quote Link to comment Share on other sites More sharing options...
AWJ Posted February 13, 2003 Share Posted February 13, 2003 Not off the top of my head. Around 200$ is the going rate. <_< Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.