? 4 Someone Who Has Changed Window Regulator W/door Closing Issue

[azmalu]

I just went through the most pia maintanence task(so far) on this car of changing out window regulator...woulda been a lot easier with second person to hold window up..

...

Anway I think my problem is related to when i screwed in three screws to the actual glass. I did my best to line up in the middle of the tic tac toe diagram and was happy that after I did this absolutely no air leak noise. Now if i close my door the same way I have been doing for years it doesnt close all the way....but if window rolled down a little bit its okay meaning that my window is up too high. Will this make the glass more frail and susceptible to crack/break?

..

What is the proper position in that tic tac toe shaped diagram to tighten screws? I thought I had it right in the middle.

[TnLex13]

There are round stoppers that stop the window from going up to far so just adjust those and everything should be fine.

[JCopp]

 

 Malfunctioning Drivers Window

Dear Fellow Lexus Owners, I have an 01 Lexus ES300.  The drivers side window is malfunctioning in the automatic mode  after I had the window regulator replaced.  

When I click the window control for automatic closing, The window automatically closes and then comes back open, about 6 inches.  I have to close the window a little at a time to fully close it.

Does anyone else have this problem?  What is the solution?
 

[coppens1]

It's a nagging problem, every time I roll up the window.  JC

[coppens1]

Malfunctioning Drivers Window

Dear Fellow Lexus Owners, I have an 01 Lexus ES300.  The drivers side window is malfunctioning in the automatic mode  after I had the window regulator replaced.  

When I click the window control for automatic closing, The window automatically closes and then comes back open, about 6 inches.  I have to close the window a little at a time to fully close it.

Does anyone else have this problem?  What is the solution?