99 Front Headlight Replacement - Glass/plastic Only?

[miaaxo]

I have a 99 ES 300, I recently had to replace the entire drivers side front lights and glass... now my other side looks very yellow and foggy in comparison to the crystal clear new one.

Is it possible to replace the plastic (its not glass, hence the yellowing) only or remove it to try and clean?

Any suggestions would be great, thanks!

[mburnickas]

my guess is nope. But I know you can put the light assemly and cook at like 250 F for XX minutes and it will un-glue the clear plastic lens (lexon or whatever it is). I have not done this but have seen many do this.

[SW03ES]

Well first of all if thats a picture of your car thats not a 99 ;)

I don't believe there is any way to purchase just the plastic lens, I believe you have to buy the whole assembly. Have you tried cleaning the lens on the one you have?

[miaaxo]

Its not my car... just an internet picture to try and show the area that I am talking about. Thanks for checking though.

[SW03ES]

I figured thats what it was, I was just kidding.

You should probably try something like Meguiars PlastX and see how it turns out.

[rnlx]

I have an extra driver side HID Xenon head light (left) 2000. It's almost new. If you are interested, send me an email rnebpart@yahoo.com

I figured thats what it was, I was just kidding.

You should probably try something like Meguiars PlastX and see how it turns out.

[SW03ES]

That wont match his other light though, the HID lamps are different.