Door Lock Code

[Arizona]

I am sure this must have been asked but nothing came up in the search...

Does anyone know the code to prevent the doors from locking when the 330RX is put in gear???

Thanks

[SKperformance]

The dealer needs to program it , should be done for free.

[jb59]

The dealer needs to program it , should be done for free.

Unless I'm mistaken, it is free if done within the first year after purchase of a new RX. Doesn't Arizona has an 04 RX?

[Booyah]

Look in the manual--its in there how to do it, I forgot its has been a while.

A real Lexus dealer would never charge you to change settings unless you came in once a week or so......

[Gibbie]

Setting the auto door locking and unlocking

functions

You can set the following auto door locking and unlocking

functions.

a - Locking linked with the shift position

All the doors are locked automatically when the selector lever

is moved out of the “P” position with the ignition switch in the

“ON” position.*

NOTE:

* This function is the default setting for new vehicles.

b - Unlocking linked with the shift position

All the doors are unlocked automatically when the selector

lever is moved to the “P” position with the ignition switch in the

“ON” position.

c - Locking linked with the vehicle speed

All the doors are locked automatically when the vehicle speed

reaches 20 km/h (12 mph) or higher. However, if any door is

unlocked during driving, this auto locking function will not

operate until the unlocked door is opened once.

d - Unlocking linked with opening the driver’s door

All the doors are unlocked automatically when the driver’s door

is opened within 10 seconds after the ignition switch is turned

from “ON” to the “ACC” or “LOCK” position.

Setting the functions

1. Close all the doors.

2. Turn the ignition switch to the “ON” position.

3. Within 10 seconds after the ignition switch is turned to the

“ON” position;

To set function - a

Push and hold the front of the power door lock switch for 5

seconds with the selector lever in the “P” position.

To set function - b

Push and hold the rear of the power door lock switch for 5

seconds with the selector lever in the “P” position.

To set function - c

Push and hold the front of the power door lock switch for 5

seconds with the selector lever in any position except “P”.

To set function - d

Push and hold the rear of the power door lock switch for 5

seconds with the selector lever in any position except “P”.

All the doors automatically lock and unlock when you release

the power door lock switch. This indicates that the function is

set. If all the doors do not lock and unlock, the time the switch

was held may have been too short or too long. Perform the

procedure over again starting from step 1.

If you want to cancel a function, repeat the procedure. Each

time you perform the procedure, the function is set or

cancelled.