Jump to content

Turn Signals - How To?


Recommended Posts


Here are the steps:

1) Open the hood and locate the large black plastic shroud that covers the tops of your headlights and the radiator.

2) Remove the shroud piece by unplugging the 5-6 plastic plug screws. Use a flathead and needle nose pliers for this step.

3) After removal of the shroud, you should be able to see a Philips screw fastened to a white plastic tab directly connected to the corner lamp. Unscrew the Philips.

4) Carefully pull the corner lamp back and away from the bumper. After lamp is pulled back from the car, locate the signal bulb housing and untwist and disconnect the bulb from the lamp.

5) Reverse the steps here to install your clear corner lamps. Good luck!

Link to comment
Share on other sites

lexusk8, you the man! I had a suspicion I'd hear from you!

When I replace those little plastic plug screws, do I just push them back in when replacing the black plastic shroud?

Thanks. I'll let you know how it goes!

Link to comment
Share on other sites

Alright, I got it done and the new corners look great! Thanks again!

Now, anyone in the market for original corners?

I also have the rear lenses (mint condition) from the same car as I upgraded to the 2001 lenses...any takers?

Let me know if interested: jaysquared@yahoo.com

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership