bran1974 Posted July 3, 2003 Share Posted July 3, 2003 I want to replace the front blinker on my 98 es300. I can not get to it from behind. It looks like I have to pop off the plastic shield. Any suggestions on how to do that? Quote Link to comment Share on other sites More sharing options...
SKperformance Posted July 3, 2003 Share Posted July 3, 2003 the sheild has little black retaniers press the small circle in the front of it and then pull up on its base pop them all up to remove the sheild i am not sure if ou need to to get to it though Quote Link to comment Share on other sites More sharing options...
m2pc Posted July 4, 2003 Share Posted July 4, 2003 I think this is what you are looking for: http://us.lexusownersclub.com/forums/index...t=ST&f=7&t=399& Oh, yeh, the tab on the shield is actually a tab within a tab. When the top one is fully inserted, it pushes the botom tab and makes it stay in place. You have to lift the top one first, do this by using a small flathead and try seperating the top flat piece from the one it sits on top of. Looking at it, you never would have guessed that it is not a single piece. Good luck Quote Link to comment Share on other sites More sharing options...
bran1974 Posted July 13, 2003 Author Share Posted July 13, 2003 The shield has a screw on top under the hood. You remove it and push the shield forward. The screw is under the plastic covering. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.