jadecuir Posted May 26, 2005 Share Posted May 26, 2005 I've got my PS pump completely apart except for the large (27MM) high pressure bolt. The bolthead has cuts on the tips, like I've seen on left-hand thread items before. Am I wrong? Standard threads here? It's very tight, and I don't want to tighten it any more than it is. John Quote Link to comment Share on other sites More sharing options...
mehullica Posted May 27, 2005 Share Posted May 27, 2005 Right hand threads Quote Link to comment Share on other sites More sharing options...
lsrxlex Posted May 27, 2005 Share Posted May 27, 2005 That's right. It has standard thread. I had to buy a 5-inch vise to loosen this "bolt". :) Quote Link to comment Share on other sites More sharing options...
jzz30 Posted May 27, 2005 Share Posted May 27, 2005 as far as i remember everything on the PS pump was right hand thread. Quote Link to comment Share on other sites More sharing options...
jadecuir Posted May 27, 2005 Author Share Posted May 27, 2005 as far as i remember everything on the PS pump was right hand thread. ← Thanks, I got it, finally. The biggest problem was finding a way to securely hold it in the vise without doing any damage to the housing. John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.