teamer Posted May 21, 2005 Share Posted May 21, 2005 Hi All, I have a 1991 LS400. The small light bulb burnt out on one of my side corner (clear) lamps adjacent to the front headlight. I tried removing the plastic lens one time and it was so difficult that I cracked the plastic. I finally got it off and replaced the bulb, however, now the other side needs to be replaced. Has anyone ever had to replace the bulb? And if so, is there an easier way to remove the plastic lens? This lens is on the side of the headlight (clear-white in color). Thanks! Dave Teamer Quote Link to comment Share on other sites More sharing options...
RFeldes Posted May 21, 2005 Share Posted May 21, 2005 As I recall, you remove the screws attached and swing it out from the grill out like a door. Quote Link to comment Share on other sites More sharing options...
teamer Posted May 21, 2005 Author Share Posted May 21, 2005 As I recall, you remove the screws attached and swing it out from the grill out like a door. ← I did remove the screws, but, it would not move out that way. In fact, there was very little movement ability in any direction which makes me think that there was more to removing the screws. Would I have to remove the headlight? Thanks! Quote Link to comment Share on other sites More sharing options...
RFeldes Posted May 22, 2005 Share Posted May 22, 2005 I don't think so but will look into it tomorrow and let you know. Quote Link to comment Share on other sites More sharing options...
RFeldes Posted May 22, 2005 Share Posted May 22, 2005 One screw/top left and then you finese it to the right and out. It is tight but will come out. Quote Link to comment Share on other sites More sharing options...
Losiho Posted May 28, 2005 Share Posted May 28, 2005 Is it the same procedure for the 1995 LS400 ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.