fjstl Posted February 13, 2005 Share Posted February 13, 2005 97 ls400 with 160k stalls intermittently and now the check enging light is on. Recent plug wired, rotors and caps. I was advised that the code reflects a possible problem with the igniter for the #2 plug. Has anyone experienced this problem and what resolved it and the cost. I think my mechanic is going to switch over the two igniter to see if it occurs with the other side after the switch. I searched and didn't see much that was similar to my problem. thanks Quote Link to comment Share on other sites More sharing options...
VMF Posted February 14, 2005 Share Posted February 14, 2005 yeah, this is not a very common problem on 1uzfe, lets see what switching colls will reveal. Quote Link to comment Share on other sites More sharing options...
fjstl Posted February 14, 2005 Author Share Posted February 14, 2005 yeah, this is not a very common problem on 1uzfe, lets see what switching colls will reveal. ← thanks Quote Link to comment Share on other sites More sharing options...
fjstl Posted February 15, 2005 Author Share Posted February 15, 2005 this is now fixed. turned out to be a bad connection on the wire that connects to the ignition coil, the one in front of the engine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.