PearlLex Posted June 10, 2003 Share Posted June 10, 2003 One of my fog lights has been out since I bought it. I already went out and bought a new bulb, but when I get under there and twisted the back of it off to change the bulb, I couldn't figure it out...anyone have any advice or ideas? Quote Link to comment Share on other sites More sharing options...
HoeBag Posted June 10, 2003 Share Posted June 10, 2003 theres some screws underneath & behind the foglight to keep it in place, it pulls right out, u can take the housing out and change the bulb that way, thats what i did anyway, i have a 97 es300, so urs might be diff if its a mcv10 or mcv30 Quote Link to comment Share on other sites More sharing options...
HoeBag Posted June 10, 2003 Share Posted June 10, 2003 i meant bolts, not screws Quote Link to comment Share on other sites More sharing options...
bbsal Posted June 10, 2003 Share Posted June 10, 2003 i just changed both of mine today.i have a 95 es300 and im not sure what you have but if its the same as mine you have to pull the whole housing down.theres 1 bolt on each side plus a screw that holds it all in.just unscrew it then pull it down and open the wire harness and inside you will see a little clip so just pull that up and then you can take the light out and replace it.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.