SugarFree223 Posted September 1, 2023 Share Posted September 1, 2023 hey yall, I just finished installing all new spark plugs, ignition coils, spark wires, and distributer cap and rotor. after I test drove it I washed it hopped in and saw the CEL, checked it once I got back and code 24 and 71 are up, I haven't had it long and the first week of having it, it threw a maf code (31) but I unplugged the ECU and checked the capacitors and reset the light after checking the wiring on the maf to see if it was faulty, since then I haven't had the code come back but now I have these 2 new codes im worries about, any ideas of why after doing the plugs and stuff it would throw them? it idles at around 900-1000, smells like it runs rich at times and will stall when you tapped the gas in drive or reverse with the foot on the brake. Quote Link to comment Share on other sites More sharing options...
SugarFree223 Posted September 1, 2023 Author Share Posted September 1, 2023 I also cleaned the throttle body a bit while everything was off of it Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.