Jump to content

Removing Headlight ?


Recommended Posts

I just acquired a super clean '93 SC 400, it has moisture inside the headlight / signal light housings. I need to repair / replace them, but I'm having difficulty figuring out how to remove the housings from the vehicle?

I only see one bolt at the top, and what appears to be a push in fitting at the outer end. However I'm unable to pull the light assembly out of the fitting 9or is there another bolt somewhere). are there any special tricks involved to remove them? Can someone give me some help !

Link to comment
Share on other sites


there are 2 bolts that you have to take off from the inside of the wheel well, first you gotta unbolt the protective layer, then after removing that, you should be able to see the 2 bolts, you might need a socket extention to reach it if you have bigger hands. and also be sure you have the items needed ready to clean the headlights and have a new cornering bulb thats either clear or chrome thats ready to be fit into the side lights. good luck.!

Link to comment
Share on other sites

there are 2 bolts that you have to take off from the inside of the wheel well, first you gotta unbolt the protective layer, then after removing that, you should be able to see the 2 bolts, you might need a socket extention to reach it if you have bigger hands. and also be sure you have the items needed ready to clean the headlights and have a new cornering bulb thats either clear or chrome thats ready to be fit into the side lights. good luck.!

Thanks, that's exactly what I wanted to know - plan to tackle the job this weekend !

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership