Jump to content

caspergsx

Regular Member
  • Posts

    22
  • Joined

  • Last visited

Profile Information

  • Lexus Model
    92 sc 400

caspergsx's Achievements

Enthusiast

Enthusiast (6/14)

  • First Post
  • Collaborator Rare
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

0

Reputation

  1. help me please ,, had to get it towed ,,,i buy this car today 93 sc400 they said it been sitting up for a year ,, anyway get it starts up drive it to gas staion and it will take any gas none just stays in the neck ,, well car runs out of gas ,, and can not put some in ,, has anyone seen this ,, do i need to pull the fuek tank or refill line ?
  2. hi guys ,, i have a 92 with a bad air strut ,, my ? i see that i can convert ot over ,, but can i just go to junkyard and get non air ride and swap it over ,, has anyone done this ,, or do i have to get a kit
  3. i have the same problem ,, when it acts up i jumped fp and b+ and it runs fine ,, has anyone just left the jumper in place at all times ,, just need to know ,, or should i just find a fuel pump ecu
  4. what i do is use my big breaker bar and 22 and lock it in the hole on the pass side frame and then bump the key to break the bolt loose ,, then use my 3/8 impact gun to install bolt ,, works great
  5. i will try it this coming weekend ,, my friend is going to let me try and swap one of his over , ,, i will let you know,, it looks like ti will work ,, i dont see why not ,, i know that people just want to sell a kit to make full profit ,, but im trying to save money right now !!
  6. ok i had my lexus in the air and another with the strut and spring set up ,, and it looks like it will work ,, has anyone tried ,, or ?
  7. i dont have $700 to spend ,, but could afford some used strut assy from a salavge yard ,, does any one know if ones from a non air ride will work ?
  8. i have a 92 with air suspension and front pass is leaking ,, can not find one used ,, any my ? is can i just swap over a coil and strut setup , from another ls and just turn off my air ride ,, or do i have to purchase a whole kit from strut masters ? has anyone done this ?,, if so should i look for a certain year or , will any ls 400 work
  9. if your using a factory pump they use FIPG to seal it up ,, there is not a gasket ! unless your useing a aftermarket one ,, i bet it is the heater valve in the rear !
  10. dam i can get a hold of some 94 ls calipers ,, so they are not a upgrade ,,what i need are the 95+ dam i dont want to buy rims also lol i guess i will stick with the stockers for now
  11. raise the wheels off the ground and see ifthe wheel moves ,, also with wheels off ground get a prybar undr tire and lift up and the feel if there is any poping ,, if it pops rpl the LCA ,, if it just bushings its not that hard just takes a little time
  12. real easy ,, got mine from pepboys ,, bolts right up ,, no problems for $40 for the set of 2
  13. cool so just calipers & rotors ,, hope they clear my stock rims ,, should becasue the ls are 16in also ? thanks alot ,, let you know how it goes
  14. oops sorry i thought i was on the sc300 sc400 side ,, talking about brakes swaps for a SC400 wait i was ,, dont be a donkey we can all live in peace if we want too!!
  15. ok so like i ask before , do you know if i need the brackets and rotors and backing plate ,, or just trim my plate and get rotors and calipers ?
×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery