sffans

Dont know car will not start.

Distrubutor, coil, cap and rotor are all good or new. Wires are all good. Guess im taking it to the shop cant figure this thing out.

I have checked the external coil and it is good. I am putting new rotor and cap on and checking the pickup coil. I think my spark is weak because it is kinda yellow and not blue. If this is not correct let me know. I have tried just about everything else. There is 140000 on the car. Thanks

What causes a weak spark?

What causes a weak spark? I have a 93 es300 and the spark seems awful weak not blue kinda yellow.Thanks for the help.

Can a shop do a diagnostic test without it running?

The car just desnt start up any more. I am not sure why i have tried alot of things. It sat for 2 years. Thanks

Can you still get fuel to the fuel rail if the fuel pump does not work. I think my fuel pump might be bad. I dont hear it coming on, but i have fuel at the fuel rail. Please help

No codes came up on the computer. Also put new gas in a still nothing. Just keeps on turning over. PLEASE HELP!!!

Took off exhaust manifold to see if car would start it still wont. Trying to pull up some codes off of the computer now. Dont know if that will tell me anything or not. But heck nothing else is working. No codes came up on the computer. Also put new gas in a still nothing. Just keeps on turning over. PLEASE HELP!!!

What will that do if i pull off the exhaust manifold?

the rotor cap looks like new. Just found out that the car has sat for about 2 years. Could the injectors be clog or not spraying a good pattern

I just pulled a spark plug and it seems to be getting fuel on it. The compression seems to be fine. It is getting spark to the plug, but it doesnt look like a real strong spark.

it was leeking had a hole in it.

the car was running fine but it has sat 4 about a year. A new raditor was put in and then it would not start. So it has just been sitting until now. I just started to work on it.

I just checked the rotor cap and all was fine looked really clean and no corrosion.

I loosened the bolt to the fuel rail and fuel squirted out. How do I check to see if fuel is going to the injectors? I also but a nail in one of the plug wires and a spark came out. So I assumed it was getting spark. I also checked the rotor and cap and all was nice and clean no corrosion. I also sprayed start fluid in the intake, when i did this it tried to fire up. It back fired. If that is not correct please tell me anthor way. Thanks

Thank you i will try that.

It just keeps turning over but never really trys to start. Checked timing belt and it looks good not broke or loose. I pulled a spark plug wire to see if it was getting spark and it was. loosened fuel line and fuel squirted out. Thanks

that has been done any more ideas would be appricated. thanks

PLEASE HELP!!!!!!!!

I have a 93 es300 and it wont seem to start. It is getting spark and fuel.It turns over like it should.

Some one told me to check the VSV and I did. It does not check to the correct ohms.

Plus some of the vacuum lines were broke off of it. Could that be the problem? Please help

cant seem to figure this thing out. Thanks