Goin_Loco

is it still up? if it is i'll apologize but i searched nd couldn't find nething if its not too much bother sk could u give me the link?

ok here's the deal i have a 94 es300 and want to put in a regular yellow top but the cables are to short to reach correctly (as you all kno). so if anyone knows how to do this please help....as for another thing is there any type of problems i should be concerned about when disconnecting the battery for more than an hour?

ok here's the deal i have a 94 ES300 and i would like to put an optima yellow top but the standard one as it will come out cheaper for me. Although as the issue is their too short to reach all the way to be in the right place :chairshot: . So what would help would be 1. What gauge cable should i use and where can i get it done 2. Should i replace the whole wiring to the battery to (relay?) and alt 3. Other alternatives to extending te cables i plan to get the ground cable replaced anyway

Thanks, I appreciate the help. How do I go about checking the needle to see if it is sticking? There are 2 screw cover tabs on the top of the inside of the cluster trim, Remove the covers and remove the 2 screws, Then pull the trim piece straight out ( there is 1 wire connector to disconnect. At this point you should be able to see the 4 screws that hold the clear plastic cover, Remove them and with a pen or similar instrument lightly push the needle to the top and let it float back down ( do this while the car is off and the tank full ) Now start the car and see if it goes to the top by itself. Be careful in there............. You owe me a beer would that process work for a 94 as well?

I work at autozone and actually replaced my hood struts with the mighty lifts and I must say they work great.

17 with a 94 ES 300 got it a few months back. i could care less what anyone says my car will be babied and it has nice potential for many mods. No way is an ES a old man car its just very classy and i love it!! ^_^

well i just attained a '94 ES300 and i wanted to change the lights in the speedo, rpm cluster and couldn't find anything on how to remove the cluster...i'm a newbie but willing to do many DIY jobs so anything helps thanks in advance |::.Goin_loco.::|