retdep
-
Posts
20 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Store
Articles
Videos
News & Articles
Everything posted by retdep
-
I replaced one of the valves but it was did not work.the part was 15340 20010 for the front bank and 15330 20010 for the back The dealer said that either number works for both banks. The dealer parts diagram shows 1533020010 for both banks. Has anyone tried this?
-
I cleaned the screens they were not that dirty. It runs smoother but tends to buck when accelerating after a stop. Im gonna check and see if timing belt may have slipped a notch.Had a new belt and water pump about 23,000 miles ago.
-
Thank you so much. Do the filters just pull out or do they screw in/ great pics.
-
Forgot 1999 es 300
-
I really need help. I was getting p code 1349.I went to Toyota and bought a new valve put it in and drove about 3 miles the check engine and trac light came on.scanned it and it was the same p code.I called Toyota and was informed that the valve filter might be clogged. Could someone advise where the filter is located and possibly a diagram? Thanks
-
Hi, Where is the Ocv screen located on a 99 ES 300
-
The damper was new as were the gaskets. It is leaking from the damper not the fitting.
-
I have a 2000 ES with 105,000 miles. the fuel pressure damper was leaking and i replaced it about 3,000 miles ago The damper started leaking today. Any thoughts of what could cause this as im 800 miles from home and dont want stuck.
-
I did the seafoam treatment.Once in the oil and twice in the fuel.before the treatment engine would stay at high rpm on cold startup for at least 3 to 4 min and car was sluggish.Just took a trip from tampa to tennesee. Roundtrip was about 1800 mi.Got 29.4 mpg acceleration was great.Thanks toys for putting me on to it. 99 es 300 70,000 mi
-
HI, I saw a post from someone giving a list of who made oil and filters for napa etc.Can someone give me the thread.
-
OK, its a 99 es300 with 66,000 mi. It idles at 2000 rpm and it takes about 2 min to get to about 700 rpm.
-
Need help in diagnosing a fast idle.When i start the car after its sitting for a a few hours rpms go to 2000 and it takes about 3-4 min to return to 700 rpm. any advise appreciated
-
Thanks for the info
-
Hi, Can anyone advise where the side air bags are located on a 1999 es 300. i need the seat repaired and the upholsterer does not know where thy are and said if they are in the seat side he could not guarantee they would work as the stitching he uses is very strong and might not tare.
-
Went to friends trans shop and he got same code. we cleared the code and think when car was last fueled that cap might have been a tad loose.have driven about 200 mi with no problems.thanks to all who submitted suggestions.
-
Gas cap was tight hoses to canister seem ok. How do i reset the code? I know if i disconnect the battery it will make radio read err. I dont know the code. someone said it might be last five numbers of vin.
-
Thanks so much for your help. Code po 446 indicates evap emission control system vent control malfunction. Am i correct to look at the carbon canister? If it is that how difficult it it to change?
-
Went to autozone and scan code was po 446. the manager said it was oxygen sensor but it did not indicate which one. thy had prices of 149 for the one at the engine and 139 for the one after the catalitic convertor. He said to change both. anyone know where to get a better price?. Also can they be taken out and cleaned?
-
Hi. My wife just called she was driving the 99 ES 300 and the check engine/trac off light came on. any information would be appreciated. The car has 60,000 mi and im the second owner
-
Just bought a 99 ES 300 and was wondering how to change the cabin air filter.
