mrmark

......nuts...... :P

Thanks......a lot of hard work and money..... :P

Did some light modifications to the LS......never can leave my cars stock.....

Silver 2007 regular body !!

iDeal Trueva coilovers for Lexus LS460 RWD for sale !!! Brand new in box and never installed. First set I know of her in the USA direct from Japan. Price is $1,300 SHIPPED to lower 48 !!!! Way below what I paid for even at wholesale pricing. Available here in the US for immediate shipping to you. Email me at: mryuen@usa.net

All custom.....no aftermarket headlights or tailights. Tails are LED already so not sure why you would need aftermarket. I had the amber sides replaced with LED's:

Sorry....sold.....

New Final Konnexion kit and Leon Hardiritt Freiden's...

Brand new K-MAC rear camber kit that allow you to adjust your camber for your rear wheels. The kit is part number 767026G from K-MAC and is brand new in box and never installed. This kit replaces the lower/outer arm bushings allowing you to retain your wheel fender clearance. This kit also includes a bushing extraction tool for an even easier installation. Kit will fit the following Lexus models, but please verify your fitment before buying: 01-06 Lexus SC430 98-05 Lexus GS300 98-05 Lexus GS400/430 01-05 Lexus IS300 Price is $320 including shipping via standard freight to the lower 48 states. Outside lower 48 or additional shipping options available at an added charge. Email me at mryuen@usa.net for any questions.

Brand new set of 2 SPC front adjust able upper control arms that allow you to adjust your camber and caster. The kit is part number 72270 from SPC and is brand new in box and never installed. Kit will adjust camber from -2 degree to 2 degree and caster from -1 degree to +1 degree. Kit will fit the following Lexus models, but please verify your fitment before buying: 02-10 Lexus SC 430 98-05 Lexus GS 300/350 98-01 Lexus GS 400 01-05 Lexus GS 430/460 Price is $350 including shipping via standard freight to the lower 48 states. Outside lower 48 or additional shipping options available at an added charge. Email me at mryuen@usa.net for any questions.

You have to remove the plexi covers.....it's hard to do without damaging the surrounding plastic and the actual lense. Use an interior panel tool, not a screwdriver.

Kit is in excellent condition and includes full front bumper, full rear bumper, side skirts, and foglights. Front bumper has CF vents moulded into the sides and LED bars. Price is $2,000 for all pieces plus shipping. Kit is located in NJ near Philly....contact me at mark@eliteviptuners.com

The bigger the rim, the lower the aspect ratio your tires need to be which results in less sidewall. Handling is improved since the sidewalls have less flex than a taller sidewall, but you can bend a rim easier. Ride will also be a little "firmer". The important part is that you keep the outside diameter is within 3%. An ES can go up to 19" without looking out of balance with the whole car. Larger wheels will tend to shake only if a hubcentric wheel or hubcentric ring is not used. If the shop cannot balance a larger wheel, you should not go to that shop.

Tell Mad Motors you know the guy in the USA that bought the same kit. Fitment was pretty good....smooth finish. The lip kit on eBay is really not my style.

Depending on where you are, this is the only place that I know will ship overseas: http://www.madmotors.co.uk/