Jaysmith

Ok, I just changed the cabin filter on the 2004 sc430. Step 1: open the glove box. step 2: the two black knobs on side of glove box, turn so they point at you. Then pull out.The glove box should fall down. Step 3: The filter cover is horizontal. lift up and pull out. Step 4; Pull filter out. It is so easy.

I believe the sensors only work with run flat tires. At least that is what I was told be the dealer. Maybe they were trying to sell me the run flats, which I didn't buy. So, the sensor light is on all the time. If anyone knows the real info, knows different, I'd like to know.

I just used the instructions in this section to replace the bottom door speakers. Excellent, without them I would heve never been able to do it. For anyone who is contemplating replacing the speakers, here are a few comments: the door handle cover is a tough to get out, when prying with the screwdriver, work from the bottom, it won't break. Also, the removal of the door handle is hard, after removing the screw, don't be timid in pulling it off. After all the screws were out, getting the panel off was a bit hard. Pull out and up from the rear side. once it "unseals" it comes out easily. One last thing, make sure you replug the bottom light before you start !Removed! screws in. I forgot on both sides. I guess the relief of replacing the speakers and replacing the panel was a bit overwelming. No problem though, the light comes out easily and can be pluggeg in and replaced in its spot.