F'd over by AST using PSB bushings

[Rocknrolla.jh]

So this weekend I finally pulled my 05' is300 rear suspension out of the car to do the bushings worn out. I previously bought all my bushings from Armstrong distributors and I dont race or anything so I decided to get all PSB polyurethane bushings for an upgrade but cut some cost from going high line racing components. Everything was going fine until I went to install the lower lateral arms. The bolt is a 14mm and the through hole on the bushing is 12mm. Called every local parts store around and none have bushings in stock and so it looks like Im riding my bike to work until I get some shipped in. Emailed Armstrong Distributors and manufacturer but no response yet. I doubt they do much if anything. They already have my $50 in their pockets for these two bushings.

Part # PSB 692

 

[Lexus Owners Club]

Wow! looks like a major overhaul, just a shame the parts are incorrect as it would have been an in-and-out job otherwise.
Hope the parts come through soon enough