Ken GS Posted March 13, 2013 Share Posted March 13, 2013 Hi Folks, I am new to the forum. Man, has it been valuable. I purchased a 2004 GS300 for my dad and am doing the typical maintenance for a 150,000 mile vehicle. The trunk lid, on the drivers side, sticks aft a tiny bit probably due to an accident. I have checked and found nothing for the horizontal adjustment of this. (I need to move it forward) I tried the following: 1)) In trunk, loosen the hinge from the lid. - No adjustment there without slotting the holes. 2) Remove back seat etc to get to the bolts on the inside. - I failed there because I couldn't extract the cover over the back end. I looked at the bolts that secure the hinge to the body and they are double threaded (the main body one dimension then about 10mm a smaller diameter). I speculate this is a way to adjust. I assume I can double nut that and back off the bolt then adjust the hood then tighten again. If someone has ideas on this, please advise. Sincerely, Frustrated Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.