Jump to content


Recommended Posts

Posted


RX300 SE-L (09/2003) - 2004 model.(UK)

Has anyone experienced the following fault, or any ideas what the problem could be? No heat flow from passenger side heater vents (aircon OK). Driver side heater OK.

Radiator coolant level full. If heating temperature controls are set to 'max hot' there is a
slight smell coming from the driver vents but this goes completely as soon as soon as another
temperature is selected. The cabin filter is new. There is no difference to these conditions whether the 'Dual' switch is set to independent or linked mode.


Many thanks for any replies

Barrie

Posted

Air mix damper position sensor .

One on driver side , one on passenger side , check or compare operation while adjusting outlet temp. Also each vent has sensors , look for disconnected sensors .

Posted

Air mix damper position sensor .

One on driver side , one on passenger side , check or compare operation while adjusting outlet temp. Also each vent has sensors , look for disconnected sensors .

Posted

Many thanks James. I will try to find the sensor etc. location when the weather here improves.

Otherwise I will get my local indy garage to sort it out for me.

Barrie

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery