Remote Problems

[billydpowell]

REMOTE PROBLEMS.. MY REMOTE WILL LOCK ALL 4 DOORS and go beep, but will not unlock doors or trunk.

New quote: this Ls400 will not program itself to receive a new signal. let me explain.

first: I know how to program a remote... done several..

I go thru the program, KEY in/out, lock/unlock/ close/open. lock/unlock, key in/out w/turn (1&2)

BUT THE PROGRAM NEVER CYCLES THE LOCKS to let you know to PRESS THE REMOTE(send the signal)

I have PRESSED THE REMOTE anyway, but to no avail...

the system will not receive it....

TROUBLE LOCATED: ONE SMART SERVICE MANAGER..

I talked with the service manager at Sewell, and he told/showed me what the problem is.

the actuator in the RF door is lazy (works inconsistantly) and when the Controller fails to receive a signal from all 4 doors (ON THE LOCK/UNLOCK SETUP), it shuts down the program.

so I need a replacement actuator.....

here is a side shot....