bstew Posted December 1, 2009 Share Posted December 1, 2009 Has anyone ever had an alignment done on the rear wheels so that they are not toed in so much as to wear the inside tread so fast and cause thumping from flat spots. Quote Link to comment Share on other sites More sharing options...
cmartin248 Posted December 1, 2009 Share Posted December 1, 2009 There have been several discussions on this matter.... not trying to be a smart$$$, but did you try a search???? saves a lot of us re-writing everything.... Quote Link to comment Share on other sites More sharing options...
iolmaster Posted January 1, 2010 Share Posted January 1, 2010 If there have been many discussions I would like to be able to find them. I searched with a number of different key words and could find nothing specific to this question. I too would like to know the answer. I have Dunlop 5000 RFTs that are wearing pretty well except the rear inside tread. It is not bad and probably will not contribute to early wear out, but if it can be eliminated, I would like to know how. The front tires have none of the pattern. The tires have about 6000 miles on them. Quote Link to comment Share on other sites More sharing options...
JerryBaumchen Posted January 1, 2010 Share Posted January 1, 2010 If there have been many discussions I would like to be able to find them. I searched with a number of different key words and could find nothing specific to this question. I too would like to know the answer. I have Dunlop 5000 RFTs that are wearing pretty well except the rear inside tread. It is not bad and probably will not contribute to early wear out, but if it can be eliminated, I would like to know how. The front tires have none of the pattern. The tires have about 6000 miles on them. Hi there, I would just give a call to me mechanic or a very good alignment shop and see what they say. Using the 'SEARCH' procedure (IMO) does not seem to work so good on this forum; nor on some others that I go to. Side question: Have you ever tried to see if a wheel from your RX300 would fit onto your SC430. I am curious as my dealer has some 'take-off' wheels from a IS250/350 that he says will not fit onto the SC430. But anymore they just sit behind a computer screen and read what it says; not a lot of independent thinking these days. Jerry Baumchen Quote Link to comment Share on other sites More sharing options...
Legenddriver Posted August 10, 2011 Share Posted August 10, 2011 That has been a problem on our 2002 as well. Just replaced tires with good tread because the very inside crown has metal showing. All this wear was from the rear tires. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.