ls400_1999 Posted August 14, 2009 Share Posted August 14, 2009 Hi Folks, Today I attemp to remove the throttle body on my LS400 1999 to clean it. However, I could not figure out how to remove out the intake air connector :-( It is one piece of hard plastic so I am affraid to pull it from the throttle body because I might break something. Can any one help me? There is a tutorial on lslx.com but that is for 1997 or early model. Thanks so much Tony Quote Link to comment Share on other sites More sharing options...
steve2006 Posted August 17, 2009 Share Posted August 17, 2009 Hi, The plug normally has a plastic clip which you depress then pull off the connector (may be underneath) on mine I found using a small flat blade screwdriver inserted in the clip held it in while I pulled the connector off. Have a look here for clues http://www.toyodiy.com/parts/g_U_1999_LEXU...L-AEAGKA_1.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.