jlgone Posted February 24, 2009 Posted February 24, 2009 The Nav screen in my 2004 GX470 GPS has a problem. It periodically (every 10-20 minutes) zooms out onelevel without any touching of the screen, so after a day of driving I can see all of north america! I can go to the set up menu and zoom back in by using the recalibration controls, but when I try try to do it from the main screen I can't get the "plus" button to function. It seems the symbols on the screen don't line up with where you are touching. It seems like there are two problems - uncontrolled unwanted zooming, and misalignment of the screen control images with the touch points. The screen has no physical damage. On screens with jusy a few controls, the screen operates properly, but when I need to slecet a button in the extreme lower left corner (e.g., the + button for map zoom) it selects the botton to the right. It seems like the touchscreen zones has been shifted to the left by an inch. I also have trouble typing in the address letters I want sometimes (again, misaligned or totally random letter selected when I touch the screen). Some screens work fine (the "I agree" one and others with only a few buttons. The radio controls usually work, but sometimes it selects the wrong station as well. Is this a problem with the screen or the computer/program? Has anyone experience this before - I searched but couldn't find this problem on the forum. I don't want to take it to the dealer and get charged thousands for a new system if the computer or a softwate update would fix this. It seems like I could get a used screen if that is the problem. Thanks for your help!
mann777 Posted February 24, 2009 Posted February 24, 2009 Ok from what i see your is purely a software problem, with the calibration. You can contact Gary from the address below, Ensure you have the model number and the serial number. He has helped a lot of members at a very low cost. Audio & Video Service Stop 288 Washington St. Weymouth, Ma. 02188 (800)838-3394 www.videoservicestop.com Also I suggest could you try a calibration test from your model, see if it works if not you get in touch with the above person. cheers
jlgone Posted February 25, 2009 Author Posted February 25, 2009 How do I perform a calibration test? I can align the GPS, but this is for the controls. Given that the screen is somewhat unpredictable, I am afraid to even go into the "secret menu" since I might cause problems I have read others have had (japenese anguage,etc) by inadvertantly slecting the wrong button!
mann777 Posted February 25, 2009 Posted February 25, 2009 I have not figured it out, but on the screen there is option from the settings > Touch screen > Calibration test. check it out.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now